United States
Canada
Colombia
Mexico
Ingredients
Water, 2-Propenoic Acid, 2-Methyl-, Polymer with Butyl 2-Propenoate, Ethenylbenzene and Methyl 2-Methyl-2-Propenoate, Zinc Complex, Ethoxydiglycol, Zinc Ammonium Carbonate, Tributoxyethyl Phosphate, Alcohol Alkoxylate, Maleic Anhydride-Propylene Polymer, Polyethylene Resin, Trideceth-3 Phosphate, C9-11 Alcohols Ethoxylated, Sodium Lauryl Sulfate, Ammonium Hydroxide, Nonoxynol, Trideceth-3, Partially Fluorinated Alcohol, Reaction Products with Phosphorus Oxide (P2O5), Ammonium Salts, Sodium Metabisulfite, Ethoxylated Tetramethyldecynediol, 5-Chloro-2-Methyl-4-Isothiazolin-3-One.Safety Data Sheets
Product Description
Rejuvenate® Shine Refresher® floor polish renews shine on flooring throughout your home with an easy, one-coat application. This formula covers smudges and helps preserve the shine of newer and recently restored floors. Safe on multiple surfaces, including sealed hardwood, laminate, vinyl and tile, this floor polish dries within 10 minutes, leaving behind a crystal-clear finish with no buildup.To achieve best results, clean floor thoroughly with Rejuvenate® All Floors Cleaner and allow floor to dry completely before applying this product. Always test on an inconspicuous area first. Prime the reusable Rejuvenate® Microfiber Restorer Pad or Bonnet with Rejuvenate® Shine Refresher™ polish until the pad/bonnet is damp. Mop evenly over the area. Allow to dry for 10 minutes before walking on the floor. NOTE: Wash Microfiber Pad or Bonnet and allow to air dry. Rejuvenate® Microfiber Pads are washable up to 100X. Use weekly or as desired depending on foot traffic. This 32-oz formula covers 625 square feet.
WARNING: This product can expose you to chemicals, including 1,4-Dioxane, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65warnings.ca.gov.
Directions For Use
PRO TIPS:• Mop in direction of the grain when applying to wood floors.
DIRECTIONS: Always test on an inconspicuous area first.
1. Sweep or vacuum to remove loose dirt and debris.
2. Clean floor thoroughly with Rejuvenate® All Floors Cleaner. Allow floor to dry completely.
3. Prime Rejuvenate™ Microfiber Restorer Pad or Rejuvenate™ Microfiber Bonnet with Rejuvenate® Shine Refresher™ polish until pad/bonnet is damp.
4. Working in small areas of 4 ft x 4 ft, pour Rejuvenate® Shine Refresher™ polish in an "S" pattern directly onto the floor.
5. Mop Rejuvenate® Shine Refresher™ polish evenly over the area. Allow to dry for 10 minutes before walking on the floor.
Use weekly or as desired depending on foot traffic.
NOTE: Wash Microfiber Bonnet or Pad and allow to air dry.
